‌NORTH‌ ‌COAST,‌ ‌Calif.‌ ‌–‌ ‌Caltrans‌ ‌reports‌ ‌that‌ ‌the‌ ‌following‌ ‌road‌ ‌projects‌ ‌will‌ ‌be‌ ‌taking‌ ‌place‌ ‌around‌ ‌the‌ ‌North‌ ‌Coast‌ ‌during‌ ‌the‌ ‌coming‌ ‌week.‌ ‌
‌
Included‌ ‌are‌ ‌Mendocino‌ ‌County‌ ‌projects‌ ‌that‌ ‌may‌ ‌impact‌ ‌Lake‌ ‌County‌ ‌commuters.‌ ‌
‌
Caltrans‌ ‌advises‌ ‌motorists‌ ‌to‌ ‌drive‌ ‌with‌ ‌caution‌ ‌when‌ ‌approaching‌ ‌work‌ ‌areas‌ ‌and‌ ‌to‌ ‌be‌ ‌prepared‌ ‌to‌ ‌stop‌ ‌at‌ ‌traffic‌ ‌control‌ ‌stations.‌ ‌
‌
The‌ ‌Caltrans‌ ‌Traffic‌ ‌Operations‌ ‌Office‌ ‌has‌ ‌reviewed‌ ‌each‌ ‌project‌ ‌and‌ ‌determined‌ ‌that‌ ‌individual‌ ‌project‌ ‌delays‌ ‌are‌ ‌expected‌ ‌to‌ ‌be‌ ‌less‌ ‌than‌ ‌the‌ ‌statewide‌ ‌policy‌ ‌maximum‌ ‌of‌ ‌30‌ ‌minutes‌ ‌unless‌ ‌noted‌ ‌otherwise.‌ ‌ ‌
‌
For‌ ‌updates‌ ‌to‌ ‌this‌ ‌list‌ ‌check‌ ‌QuickMap‌ ‌at‌ ‌www.dot.ca.gov‌ ‌or‌ ‌1-800-GAS-ROAD‌ ‌
(1-800-427-7623).‌ ‌
‌
LAKE‌ ‌COUNTY‌ ‌
‌
Highway‌ ‌20

– Bridge work from Clover Creek to Upper Lake Lucerne Road will occur on Monday, March 15. One-way traffic control will be in effect overnight from 7 p.m. to 6 a.m. Motorists should anticipate 10-minute delays.

– AT&T has been granted a Caltrans Encroachment Permit for utility work at Foothill Drive on Friday, March 12. One-way traffic control will be in effect from 9 a.m. to 3 p.m. Motorists should anticipate five-minute delays.

– PG&E has been granted a Caltrans Encroachment Permit for utility work at Bruner Drive on Wednesday, March 17. One-way traffic control will be in effect from 8 a.m. to 1 p.m. Motorists should anticipate five-minute delays.

Highway 29

– PG&E has been granted a Caltrans Encroachment Permit for utility work from Hill Avenue to Wardlaw Street beginning Monday, March 15. One-way traffic control will be in effect weekdays from 8 a.m. to 4 p.m. Motorists should anticipate five-minute delays.

– Sign work from Route 175 Northwest Middletown to Butts Canyon – Saint Helena will begin on Monday, March 15. One-way traffic control will be in effect weekdays from 7 a.m. to 5 p.m. Motorists should anticipate 15-minute delays.

– Sign work at Spruce Grove Road North will begin on Monday, March 15. One-way traffic control will be in effect weekdays from 7 a.m. to 5 p.m. Motorists should anticipate 15-minute delays.

– Highway construction from Route 281 to Private Drive will continue. One-way traffic control will be in effect overnight weekdays from 8 p.m. to 7 a.m. Motorists should anticipate 15-minute delays.

– Bridge work from Argonaut Road to Route 175 will occur on Tuesday, March 16. One-way traffic control will be in effect overnight from 7 p.m. to 6 a.m. Motorists should anticipate 10-minute delays.

MENDOCINO COUNTY

Highway 1

– Sign work from Road 526 to Route 271 will continue Friday, March 12. One-way traffic control will be in effect from 7 a.m. to 6 p.m. Motorists should anticipate 15-minute delays.

– PG&E has been granted a Caltrans Encroachment Permit for utility work from Signal Port Creek Road to Iverson Road on Friday, March 12. One-way traffic control will be in effect from 9 a.m. to 5 p.m. Motorists should anticipate five-minute delays.

– Grinding and paving operations from Iverson Avenue to Lake Street in Point Arena will occur on Friday, March 12. One-way traffic control will be in effect from 7 a.m. to 7 p.m. Motorists should anticipate 15-minute delays.

– PG&E has been granted a Caltrans Encroachment Permit for utility work from Mill Creek to Private Road on Friday, March 12. One-way traffic control will be in effect from 8:30 a.m. to 4 p.m. Motorists should anticipate five-minute delays.

– Sign work from Ten Mile River to Route 271 will begin on Monday, March 15. One-way traffic control will be in effect weekdays from 7 a.m. to 5 p.m. Motorists should anticipate 15-minute delays.

– Emergency work at Blue Slide Gulch will continue. One-way traffic control will be in effect. Motorists should anticipate 10-minute delays.

Highway 20

– PG&E has been granted a Caltrans Encroachment Permit for utility work from Route 20 Fort Bragg to Willits Road on Tuesday, March 16. One-way traffic control will be in effect from 8:30 a.m. to 5 p.m. Motorists should anticipate five-minute delays.

– Slide removal two miles west of Three Chop Road will continue. One-way traffic control will be in effect. Motorists should anticipate 10-minute delays.

Highway 101

– Emergency work from North Willits Railroad Crossing to Big Trails Drive will continue. One-way traffic control will be in effect from 6:30 a.m. to 6 p.m. Motorists should anticipate 20-minutes delays.

– Emergency work from 0.15 miles north of Road 310B to Shimmins-Long Valley Creek 10 99 will continue. Lane closures will be in effect from 6:30 a.m. to 6:30 p.m. Motorists should anticipate five-minute delays.

– Moss Cove Safety Rest Area will be closed through fall 2021.

– Sign work from Long Valley Creek 10 99 to Ten Mile Creek will continue Friday, March 12. One-way traffic control will be in effect from 7 a.m. to 6 p.m. Motorists should anticipate 15-minute delays.

– Emergency work from Ten Mile Creek to Big Trails Drive will continue. Lane closures will be in effect from 6:30 a.m. to 6:30 p.m. Friday, March 12 and Saturday, March 13. Motorists should anticipate five-minute delays.

– Emergency work from Road 307 to Bell Springs & Road 324 will continue. One-way traffic control will be in effect from 6:30 a.m. to 6:30 p.m. Motorists should anticipate 20-minute delays.

– Sign work from Ten Mile Creek to Bell Springs and Road 324 will occur.

– Emergency work from Road 307 to Bell Springs & Road 324 will begin on Friday, March 12. One-way traffic control will be in effect from 6:30 a.m. to 7 p.m. Motorists can anticipate 20-minute delays.

– Empire Camp Safety Rest Area will be closed through fall 2021.

Highway 162

– PG&E has been granted a Caltrans Encroachment Permit for utility work from Mina Road to Road 337K beginning Monday, March 15. One-way traffic control will be in effect from 9 a.m. to 5:30 p.m. Motorists should anticipate five-minute delays.